compatible with 2- and 4-wire i 3 detec- tors equipped with a sounder activates all i 3 sounders on a loop when one alarms synchronizes all i 3 sounders on the loop for a clear alarm signal can be used with bell/alarm, alarm relay, or nac outputs includes a ?ld-selectable switch to accommodate both coded and continu- ous alarm signals allows i 3 detector silencing from the panel or keypad operates on 12- and 24-volt systems quick-connect harness and color coded wires facilitate connections model RRS-MOD reversing relay/synchronization module for i 3 series sounder models product overview RRS-MOD system sensor? RRS-MOD reversing relay/synchronization module enhances the operation of 2- and 4- wire i 3 series detectors equipped with a sounder. installation ease. the RRS-MOD includes a velcro attachment for easy installa- tion into the ?e alarm control panel cabinet. a quick-connect harness and color-coded wires simplify connections. intelligence. the RRS-MOD s design is ?xible to accommodate virtually any application. the RRS-MOD is compatible with both 2- and 4-wire i 3 series detectors operating over 12v and 24v systems. the module can be used with either bell/alarm, alarm relay, or nac outputs, and its ?ld-selectable switch accommodates both coded and continuous alarm signals. instant inspection. to meet ?e alarm requirements, the RRS-MOD activates all i 3 sounders on a loop when one alarms. additionally, the RRS-MOD synchro- nizes the output of the i 3 sounders, regardless of whether the panel s alarm sig- nal is continuous or coded, to ensure a clear alarm signal. series reversing relay/ synchronization module conventional detection
?002 system sensor. the company reserves the right to change product speci?ations without notice. a05-0350-000?1/02?990 eol optional remote annunciator (ra400z) optional remote annunciator (ra400z) + ? ul listed alarm control panel 2?wire initiating device circuit purple t+ + ? + ? aux power yellow in+ orange in? red pwr+ black pwr? brown out+ white out? 1 + in 2 + out 3 - in/out 4 ra+ 5 ra- 1 + in 2 + out 3 - in/out 4 ra+ 5 ra- + ? bell/ alarm circuit (positive signal in alarm state) alarm relay (no contact) ul listed alarm control panel 2?wire initiating device circuit purple t+ + ? + ? aux power yellow in+ orange in? red pwr+ black pwr? brown out+ white out? eol optional remote annunciator (ra400z) optional remote annunciator (ra400z) + ? 1 + in 2 + out 3 - in/out 4 ra+ 5 ra- 1 + in 2 + out 3 - in/out 4 ra+ 5 ra- + ? 2-wire system triggered from alarm/bell circuit: 2-wire system triggered from alarm relay contact: note: these diagrams represent two common wiring methods. refer to the RRS-MOD installation manual for addi- tional wiring con?urations. reversing relay/synchronization module shall be a system sensor i 3 series model number RRS-MOD, listed to underwriters laboratories as a smoke detector accessory. the module shall allow all 2-wire and 4- wire i 3 series detectors equipped with a sounder on a loop to sound when one alarms. the module shall provide a switch to toggle between coded mode and continu- ous mode. when in coded mode, the mod- ule shall synchronize the i 3 sounders on the loop to mirror the input signal. when in continuous mode, the module shall syn- chronize the i 3 sounders on the loop to the ansi s3.41 temporal coded pattern. in either coded or continuous modes, the RRS-MOD module shall permit sounders to be silenced at the panel. the RRS-MOD module shall operate between 8.5 and 35 vdc, and shall provide 18 awg stranded, tinned conductors connected to a quick- connect harness. architect/engineer speci?ations ordering information model description RRS-MOD reversing relay/synchronization module for i 3 series smoke detectors electrical specifications operating voltage avg. operating current relay contact rating nominal: 12 / 24 v 25ma 2 a @ 35 vdc min.: 8.5 v max.: 35 v physical specifications operating temperature rangez operating humidity range wire connections 32??31? (0??5?) 5% to 85% non-condensing 18 awg stranded, tinned, 16 long dimensions height: 2.5 inches (63 mm) width: 2.5 inches (63 mm) depth: 1 inch (25 mm) s0101-00 s0103-00 system sensor sales and service system sensor headquarters 3825 ohio avenue st. charles, il 60174 ph: 800/sensor2 fx: 630/377-6495 documents-on-demand 800/736-7672 x3 www.systemsensor.com system sensor canada ph: 905.812.0767 fx: 905.812.0771 system sensor europe ph: 44.1403.276500 fx: 44.1403.276501 system sensor in china ph: 86.29.524.6253 fx: 86.29.524.6259 system sensor in singapore ph: 65.6273.2230 fx: 65.6273.2610 system sensor ?far east ph: 85.22.191.9003 fx: 85.22.736.6580 system sensor ?australia ph: 613.54.281.142 fx: 613.54.281.172 system sensor ?india ph: 91.124.637.1770 x.2700 fx: 91.124.637.3118
|
